Miki Pulley - Miki Pulley VietNam - Khớp Nối Miki Pulley của Nhật - SFC - SFF - STF - CF-A-090-O2-1360 - ALS - CF-A-090-02

  • 0 vnđ

SONG THÀNH CÔNG là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị, dụng cụ đo lường, kiểm tra công nghiệp/điện-tự động hóa”

Hãy cung cấp thông tin về bất cứ sản phẩm nào bạn đang cần, chúng tôi bảo đảm về chất lượng, dịch vụ và giá cả tổt nhất.

Hãy liên hệ với chúng tôi để có giá tốt nhất.

0919191931 |Mr Bình|

Email: binh@songthanhcong.com

Công ty chúng tôi là đại diện phân phối MIKI PULLEY tại Việt Nam



These metal disc-spring couplings with ultra-high torsional stiffness were developed for servo motor applications. The disc-spring method provides excellent properties: firmness in the torsional direction but flexibility in the bending, step-difference, and axial directions. The disc spring that serves as the element has an unbeatable theoretically derived shape that is the result of rigorous analysis with the latest finite element method.


STEPFLEX couplings for servo stepping motors that boast high damping performance. Our newly developed laminated rubber element (HNBR) achieves high damping and low reaction force. These couplings absorb vibration faster than flexible couplings that use metal in their elastic components. This suppresses the resonance phenomenon that can occur with stepping motors.



These are rigid couplings with ultra-high torsional stiffness that were developed for servo motor applications. Unlike flexible couplings, they have no element to absorb differences between the centers of the two shafts, so they have very high torsional stiffness.


These couplings connect a hub that mounts on the shaft to another hub, separated by a metal coil. They achieve excellent flexibility, compact size, and high torque. Different models may connect either a shaft to another shaft or a shaft to a flange.



These are pin-bushing type couplings whose bodies are made of aluminum alloy. Backlash is kept extremely low by making the torsional stiffness of all components very high and combining high-precision pins with dry metal. A universal system is used for all hub coupling, which makes shaft reaction force due to mounting misalignment extremely small. There is also a damping effect from sliding at the friction surface between the pin and dry metal.


When transmitting power between shafts with different centers, which have traditionally been constituted of a spline shaft and a universal joint, Schmidt couplings can be used to efficiently transmit power in a compact form factor. Schmidt couplings are couplings with different shaft centers that use the crank motion of a link. They not only allow power transmission when shaft centers are different, they also enable translation of shaft centers while rotating.



The simple construction of these couplings sandwiches a buffer piece called an element (made of polyurethane elastomer) between two hubs. Elements of two different hardnesses are available so you can select the appropriate one for your torque transmission responsiveness and amount of misalignment. Since the design pre-compresses the element, it can also be used without backlash.


These couplings have a simpler design that sandwiches a rubber buffer (nitrile rubber) between two hubs. The hub is lightweight, being made of aluminum alloy. Mounting on a shaft is easy. Simply hold a straight-edge to the hub periphery to center it. One source of appeal is that its simple construction means lower cost.



These couplings absorb vibration and have extremely low counter force caused by mounting misalignment, thanks to the use of a plastic boot made of resin with excellent elastic properties (polyester resins). They are compact and lightweight, since the aluminum alloy hub and boot are designed with a unitized construction. Thanks to the unitized construction, they are easy to mount and remove, and there is no backlash. They come in three sizes, and all are highly flexible couplings that allow eccentricity of 0.5 mm and an angle of deflection of 10°.


Rubber couplings dampen and absorb shock and vibrations using the elasticity of rubber, while plastic couplings do the same with plastics. Their advantages include high flexibility, low noise, easy maintenance (because they do not require lubrication), simple construction, and long service life.

Chúng tôi chuyên cung cấp các sản phẩm về: Cảm biến, đầu dò, encoder, relays, PLC, HMI, inverter, thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, pump…


“Hành động kịp thời –  Đáp ứng nhanh chóng – Dẫn đầu tự động – Đi đầu Cải tiến”


Nguyễn Quan Bình I Senior Sales Eng I
Cellphone I       +84 919 191 931

Email I                binh@songthanhcong.com
Online contact===================================

[ Yahoo ] binh87_stc       [ Skype ] binh87_stc